VLAN retagging/translation of regular 802.1Q traffic
You can use ACLs (to match the VLAN and set the action of the outer-vlan-tag) to retag or translate VLANs with regular 802.1Q traffic.
config switch acl ingress
edit 1
config action
set outer-vlan-tag 2333
end
config classifier
set vlan-id 350
end
set ingress-interface "mclag-761_419"
next
end
On some FortiSwitch models, you can also apply an ACL on the prelookup and egress stages. The configuration is similar to the configuration in this section and is done under the config switch acl prelookup
or config switch acl egress
commands, respectively.