Resolved issues
The following issues have been fixed in FortiSwitchOS 7.2.2. For inquiries about a particular bug, please contact Customer Service & Support.
718440 | When 802.1X MAC-based authentication, dynamic VLAN assignment, and allow-mac-move are configured, the FortiSwitch unit incorrectly forwards packets with VLAN tags. |
795041 | The VM debug report (System > Debug Report) is missing information for many CLI commands. |
814741 | MAC authentication bypass (MAB) authentication sometimes does not work on a managed FS-108E. |
818959 | The DHCP server does not allow DHCP clients to move from one interface to another. |
821808 | After using the FortiSwitch Configuration Migration Tool, all VLANS are missing. |
824283 | The output of the diagnose switch physical-ports qos-stat list
command shows the same number of dropped packets for queue 0 for all ports. |
825614 | The status of the second power supply unit is incorrectly reported as “Not OK.” |
830533 | After upgrading to FortiSwitchOS 7.2.1, the status of the single power supply unit is incorrectly reported as “Not OK,” and the status of the fan is incorrectly reported as more than 100 percent. |
831495 | The TV multicast receivers do not unsubscribe from the multicast stream. |
831546 | Logging in to a FortiSwitch unit that is managed by FortiSwitch Manager displays a message that incorrectly refers to FortiLink and FortiGate. |
840114 |
When running FortiSwitchOS 7.2.1 build 4755 on the FS-124F-POE, FS-124F-FPOE, FS-148F-POE, and FS-148F-FPOE models, auto-network gets disabled after a reboot or upgrade. After such operations, you need to manually enable auto-network. |
Common vulnerabilities and exposures
FortiSwitchOS 7.2.2 is no longer vulnerable to the following vulnerabilities and exposures:
-
CVE-2022-31116
-
CVE-2022-31117
Visit https://fortiguard.com/psirt for more information.