Resolved issues
The following issues have been fixed in FortiSwitchOS 7.2.4. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
|
829804 |
Changed which CLI commands are available, depending on whether the user has the enhanced debugging license. |
| 833450 | Do not use multicast IP addresses in the ranges of 224-239.0.0.x and 224-239.128.0.x on the FS-2xxD, FS-2xxE, FS-4xxD, and FS-4xxE models. |
|
848619 |
When connecting FS-124F-POE to FS-148F-POE with the FTLF8519P3BNLFTN, the SFP module port does not come up on the FS-148F-POE when auto-module is configured. |
|
856123 |
When the “network-monitor settings” are enabled, there are multiple “CPU_SENSOR (78.0%) cleared warning threshold of (85.0%)” messages in the log. |
| 859563 | When the admin password contains a space and is set in the GUI, the user cannot log in using the GUI. |
| 867758 | FortiSwitch units using IPv6 do not respond to SNMPv3 requests. |
| 868358 | It should optional to specify the Certificate Authority (CA) name when downloading the CA certificate using the Simple Certificate Enrollment Protocol (SCEP). |
| 868886, 869843 | The GUI for the FS-224E-POE, FS-248E-POE, FS-448E-POE, FS-248E-FPOE, and FS-426E-FPOE-MG models shows the ports in brown and the message, “This port is unavailable under the current configuration.” |
| 869616 | The FortiAnalyzer and FortiSwitch logs have multiple entries about the fan tray being detected or undetected on an FS-1048E switch, although the fan status is good. |
| 872727 | After upgrading to FortiSwitchOS 7.0.5, the status of PSU2 is wrongly reported as “Not inserted.” |
| 874684 | Some layer-2 managed FortiSwitch units are flagged as being layer-3 switches in the output for the execute switch-controller get-conn-status command. |
| 877360 | Using one of the mac-move commands on FX-1xxE and FS-1xxF models causes protocol packets to be dropped when allowing an 802.1X client to move between ports that are not directly connected to the FortiSwitch unit without having to delete the 802.1X session. |
| 879156 | Creating a new LLDP-MED profile in the GUI results in an Internal Server Error. |