Introduction
This document provides the following information for FortiSwitchOS 7.2.5 build 0453.
- Supported models
- Special notices
- Upgrade information
- Product integration and support
- Resolved issues
- Known issues
See the Fortinet Document Library for FortiSwitchOS documentation.
Supported models
FortiSwitchOS 7.2.5 supports the following models:
| FortiSwitch 1xx | FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE |
| FortiSwitch 2xx | FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE |
| FortiSwitch 4xx | FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448E, FS-448E-POE, FS-448E-FPOE |
| FortiSwitch 5xx | FS-524D, FS-524D-FPOE, FS-548D, FS-548D-FPOE |
|
FortiSwitch 6xx |
FS-624F, FS-624F-FPOE, FS-648F, FS-648F-FPOE NOTE: Build 5293 supports these models. |
| FortiSwitch 1xxx | FS-1024D, FS-1024E, FS-1048E, FS-T1024E |
|
FortiSwitch 2xxx |
FS-2048F NOTE: Build 6071 supports these models. |
| FortiSwitch 3xxx | FS-3032E |
| FortiSwitch Rugged | FSR-112D-POE, FSR-124D, FSR-424F-POE |
What’s new in FortiSwitchOS 7.2.5
Release 7.2.5 provides the following new features:
-
You can now specify in the CLI that the access control list (ACL) prelookup policy applies to all ingress interfaces. Previously, you could specify only a single interface.
-
EAP-FAST is now supported.
-
You can now split ports on the FS-T1024E and FS-1024E models. You can enable the maximum speed (100G) of ports 25 and 26; each split port has a maximum speed of 25G.
Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.