Introduction
This document provides the following information for FortiSwitchOS 7.2.6 build 0471.
- Supported models
- Special notices
- Upgrade information
- Product integration and support
- Resolved issues
- Known issues
See the Fortinet Document Library for FortiSwitchOS documentation.
Supported models
FortiSwitchOS 7.2.6 supports the following models:
| FortiSwitch 1xx | FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE |
| FortiSwitch 2xx | FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE |
| FortiSwitch 4xx | FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448E, FS-448E-POE, FS-448E-FPOE |
| FortiSwitch 5xx | FS-524D, FS-524D-FPOE, FS-548D, FS-548D-FPOE |
|
FortiSwitch 6xx |
FS-624F, FS-624F-FPOE, FS-648F, FS-648F-FPOE |
| FortiSwitch 1xxx | FS-1024D, FS-1024E, FS-1048E, FS-T1024E |
|
FortiSwitch 2xxx |
FS-2048F |
| FortiSwitch 3xxx | FS-3032E |
| FortiSwitch Rugged | FSR-112D-POE, FSR-124D, FSR-424F-POE |
What’s new in FortiSwitchOS 7.2.6
Release 7.2.6 provides the following new features:
-
The FS-1048 model now supports autonegotiation for the 40G direct-attach cable (FN-CABLE-QSFP+).
-
You can now generate an elliptic curve (ECDSA) certificate using a certificate signing request (CSR). You can choose an SECP256R1, SECP384R1, or SECP521R1 elliptic curve.
-
The Message-Authenticator attribute is now used for authentication in MAC authentication bypass (MAB) Access-Request messages.
-
You can now split ports 25 and 26 of the FS-T1024E and FS-1024E models into four subports of 10G (as well as 25G).
-
The FS-624F, FS-624F-FPOE, FS-648F, and FS-648F-FPOE models now support FG-TRAN-LX, FG-TRAN-GC, FG-TRAN-SX, FS-TRAN-GC, FR-TRAN-ZX, FR-TRAN-SX, FN-TRAN-GC, FN-TRAN-SX, FN-TRAN-LX, and FN-TRAN-DSL.
Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.