Resolved issues
The following issues have been fixed in FortiSwitchOS 7.2.6. For inquiries about a particular bug, please contact Customer Service & Support.
Bug ID | Description |
---|---|
760843 | 802.1x MAC Authentication Bypass (MAB) switch sessions are not reauthenticated on port4 of a FS- 108E. |
845706 | The output of the diagnose switch-controller switch-info 802.1X command differs. |
889987 | When the port descriptions are too long, a “500 Internal Server Error” is reported. |
914774 | Enabling energy-efficient Ethernet (EEE) on the FS-448E-POE disrupts traffic. |
918017 | Using RSPAN on managed FSR-112D switches under FortiOS 7.0.11 causes network interruptions. |
919505 | MAB authentication fails on FS-148F-FPOE running FortiSwitchOS 7.2.4 for laptops and phones. |
919943 | When the setting for strong cryptology is changed, the new setting does not take effect until the switch is restarted. |
922098 | When a device is connected to an FS-148F-FPOE managed by FortiCloud, the network becomes unstable. |
922571 | The user cannot import the PKCS12 certificate. |
924247 | Sticky MAC addresses and the MAC learning limit are not working on the FS-1xx models. |
927820 | The FortiOS event log does not include the source IP address when a security scanning tool is used. |
930931 | DHCPv6 packets were seen in the internal port of the FS-124F-FPOE models. |
934041 | The DHCP-snooping performance needs to be improved on the FS-1xxE and FS-1xxF models. |
935537 | After setting the FS-108F-PoE port to perpetual PoE, the setting did not take effect without restarting the switch. |
935918 | The VOIP phone and PC connectivity needs to be stable. |
940956 | Adding or removing an SNMP community on a tier-1 MCLAG switch causes the switch to become unresponsive for 10 seconds on all VLANs when a large number of network interfaces are configured. |
941692 | After DHCP snooping is enabled on FS-1xx models, devices cannot receive DHCP addresses. |
942118 | After configuring MACsec on the FS-524D model, the switch becomes unresponsive and stops forwarding traffic. |
942140 | The MAC address moves between FortiAP units when the FortiAP units are connected to two different FortiSwitch units. |
945471 | Configuring a low VRRP ID number on one of a pair of FS-T1024E switches causes the switch to lose connection with the backup switch. |
950325 | The FS-424E model runs out of memory and stops working until the switch is restarted. |
954437 | When RADIUS accounting is turned on, the daemon for 802.1x port-based authentication occasionally crashes and causes the VLAN assignment to leak. |
958507 | When using FS-2xx or FS-4xx models, OSPF multicast hello packets from the FortiGate device do not reach third-party switches. |
961041 | 802.1X authentication does not work when the Windows client is used with the FortiGate local database and FIPS. |
961512 | The System > FortiLAN Cloud page displays “Invalid License,” even though the FortiSwitch unit is using the Cloud Advanced Management License. |
963009 |
When DHCP discovery and the |
963375 |
The FortiGate device cannot discover the FS-1xxE and FS-1xxF models. |
965182 |
MAB events are rejected when using 802.1X authentication, FortiLink, LLDP voice VLAN, MAB, and a phone. |
965640 |
There are random fan alarms for the FS-4xx models. |
967568 |
There is a broadcast/multicast storm while an MCLAG peer is booting up. |
967931 |
A managed FSW-448E-FPOE went offline because of a memory leak. |
978579 |
After the client is disconnected from the port, there are continuous log messages for “authorization status=success.” |