Results
Results page provides a comprehensive overview of the Connectivity/ Throughput test results, including completed tests and tests in progress.
Completed Tests
The Completed Tests panel displays a list of tests that have been completed. It includes the following information for each test:
-
Test Name - The name of the test performed.
-
SSID - The SSID associated with the test, indicating the network or wireless access point being tested.
-
Test Type - The type of test conducted, such as Connectivity or Throughput.
-
Device Name - The name of the device used to perform the test, allowing users to track the source of the test data.
-
End Time - The timestamp indicating when the test was completed.
-
Result - The result field represents the outcome of the test. It is color-coded and displays the number of results categorized as Good(Green), Bad(Red), Fair(Orange), or Unknown(Blue). Click on the test results to view more detailed information.
-
Bad Results - The number of bad results.
-
Device IP Address - IP address of the device.
-
Device Serial - The serial number of the device.
-
Fair Results - The number of fair results.
-
Good Results - The number of good results.
-
Start Time - The timestamp indicating when the test was started.
-
Unknown Results - The number of unknown results.
Tests in Progress
The Tests in Progress panel provides users with a list of tests that are currently in progress or scheduled. It includes the following information for each test:
- Test Name - The name of the test performed.
-
SSID - The SSID associated with the test, indicating the network or wireless access point being tested.
-
Test Type - The type of test conducted, such as Connectivity or Throughput.
-
Sweep Mode - The sweep mode configured for the test, either recursive or baseline.
-
Device Name - The name of the device designated to perform the test.
-
State - The current state of the test.