Dashboard
The Dashboard contains widgets that provide performance and status information and enable you to configure basic system settings. The dashboard also contains a CLI widget that lets you use the command line through the GUI.
The following widgets are available:
|
Widget |
Description |
|---|---|
|
System Information |
Displays basic information about the FortiAnalyzer system, such as up time and firmware version. You can also enable or disable Administrative Domains and adjust the operation mode. For more information, see System Information widget. From this widget you can manually update the FortiAnalyzer firmware to a different release. For more information, see Updating the system firmware. The widget fields will vary based on how the FortiAnalyzer is configured, for example, if ADOMs are enabled. |
|
System Resources |
Displays the real-time and historical usage status of the CPU, memory and hard disk. For more information, see System Resources widget. |
|
License Information |
Displays how many devices of the supported maximum are connected to the FortiAnalyzer unit. See License Information widget. From this widget you can manually upload a license for VM systems. |
|
Unit Operation |
Displays status and connection information for the ports of the FortiAnalyzer unit. It also enables you to shutdown and restart the FortiAnalyzer unit or reformat a hard disk. For more information, see Unit Operation widget. |
|
CLI Console |
Opens a terminal window that enables you to configure the FortiAnalyzer unit using CLI commands directly from the GUI. For more information, see CLI Console widget. |
|
Alert Message Console |
Displays log-based alert messages for both the FortiAnalyzer unit and connected devices. For more information, see Alert Messages Console widget. |
|
Log Receive Monitor |
Displays a real-time monitor of logs received. You can view data per device or per log type. For more information, see Log Receive Monitor widget. |
|
Insert Rate vs Receive Rate |
Displays the log insert and receive rates. For more information, see Insert Rate vs Receive Rate widget.
|
|
Log Insert Lag Time |
Displays how many seconds the database is behind in processing the logs. For more information, see Log Insert Lag Time widget.
|
|
Receive Rate vs Forwarding Rate |
Displays the Receive Rate, which is the rate at which FortiAnalyzer is receiving logs. When log forwarding is configured, the widget also displays the log forwarding rate for each configured server. For more information, see Receive Rate vs Forwarding Rate widget. |
|
Disk I/O |
Displays the disk utilization, transaction rate, or throughput as a percentage over time. For more information, see Disk I/O widget. |