Adding a user server
To add a user server:
- Go Administration > User Servers. Click Add. The settings display.
- Configure the following options:
Enter the user server's IP address or name.
Enter the port for EMS to use to connect to the user server.
Enter the user server's DN. You must use only capital letters when configuring the DN.
Select Simple, Anonymous or Regular for the bind type.
Appears only when the Regular bind type is selected. Enter the username.
Appears only when the Regular bind type is selected. Enter the password.
Show the password.
Enable LDAPS connection.
Configure the synchronization schedule between the user server and EMS.
- Click Test to check the LDAP server settings.
- Click Save.