Deploy the decoys
Checking for multiple IPs
To check the multiple IPs on AWS platform:
- In the AWS Management Console, go to Network Interfaces.
- Open the Interface you created and verify the values in Private IPv4 address and Secondary private IPv4 Addresses.
Configuring decoys on FortiDeceptor manager
To choose a cloud appliance in deployment wizard.
- In FortiDeceptor, go to Deception Deployment Wizard and create a new template.
- In the Configuration tab, in Appliance Name choose the AWS cloud device.
- In the Set Network tab, click Add network for Deployment and configure the following settings:
Deploy Network Select one of the multiple IPs. Mac Address Enter the MAC address for the cloud device. IP Ranges Enter the IP range. - Click Done to deploy the decoy.
- (Optional) Deploy more decoys.
To deploy decoys for different interfaces, repeat Checking for multiple IPs
To deploy more decoys for the same interface, repeat Configuring decoys on FortiDeceptor manager.
- Attack this decoy IP via the endpoint in the cloud and check the incidents as regular deployment.