Preparing FortiDeceptor for deployment

To prepare FortiDeceptor for deployment, download the FortiDeceptor image from FortiCloud. Prepare the AWS network by creating a Virtual Public Cloud, subnets, an Internet gateway, and route table. After the network is prepared you will need to import an AMI image to create a VM instance, then associate the instance with public IP addresses to deploy the decoys.

To prepare for deployment:

1. Prepare the FortiDeceptor image.
2. Prepare the network in AWS.
3. Create a bucket.
4. Import the FortiDeceptor image to AWS AMI.
5. Check the imported image.
6. Create an instance from the AMI image.
7. Verify the instance.
8. Associate a public IP to port1
9. Configure multiple IPs for deployment.