config system virtual-switch

This command is available for reference model(s) FortiGate 140E-POE, FortiWiFi 61F. It is not available for FortiGate 501E, FortiGate 3000D, FortiGate VM64.

Configure virtual hardware switch interfaces.

config system virtual-switch

Description: Configure virtual hardware switch interfaces.

edit <name>

set physical-switch {string}

set vlan {integer}

config port

Description: Configure member ports.

edit <name>

set speed [auto|10full|...]

set status [up|down]

set alias {string}

set poe [enable|disable]

next

end

set span [disable|enable]

set span-source-port {string}

set span-dest-port {string}

set span-direction [rx|tx|...]

next

end

config system virtual-switch

Parameter	Description	Type	Size
physical-switch	Physical switch parent.	string	Maximum length: 15
vlan *	VLAN.	integer	Minimum value: 0 Maximum value: 4294967295
span	Enable/disable SPAN.	option	-
	Option Description disable Disable SPAN. enable Enable SPAN.
span-source-port	SPAN source ports.	string	Maximum length: 15
span-dest-port	SPAN destination port.	string	Maximum length: 15
span-direction	SPAN direction.	option	-
	Option Description rx Span receive direction only. tx Span transmit direction only. both Span both directions.

* This parameter may not exist in some models.

config port

Parameter	Description	Type	Size
speed	Interface speed.	option	-
	Option Description auto Automatically adjust speed. 10full 10M full-duplex. 10half 10M half-duplex. 100full 100M full-duplex. 100half 100M half-duplex. 1000full 1000M full-duplex. 1000half 1000M half-duplex. 1000auto 1000M auto adjust.
status	Interface status.	option	-
	Option Description up Interface up. down Interface down.
alias	Alias.	string	Maximum length: 25
poe *	Enable/disable PoE status.	option	-
	Option Description enable Enable PoE status. disable Disable PoE status.

* This parameter may not exist in some models.