config firewall multicast-policy

Configure multicast NAT policies.

config firewall multicast-policy

Description: Configure multicast NAT policies.

edit <id>

set status [enable|disable]

set logtraffic [enable|disable]

set srcintf {string}

set dstintf {string}

set srcaddr <name1>, <name2>, ...

set dstaddr <name1>, <name2>, ...

set snat [enable|disable]

set snat-ip {ipv4-address}

set dnat {ipv4-address-any}

set action [accept|deny]

set protocol {integer}

set start-port {integer}

set end-port {integer}

set auto-asic-offload [enable|disable]

next

end

config firewall multicast-policy

Parameter	Description	Type	Size
status	Enable/disable this policy.	option	-
	Option Description enable Enable this policy. disable Disable this policy.
logtraffic	Enable/disable logging traffic accepted by this policy.	option	-
	Option Description enable Enable logging traffic accepted by this policy. disable Disable logging traffic accepted by this policy.
srcintf	Source interface name.	string	Not Specified
dstintf	Destination interface name.	string	Not Specified
srcaddr <name>	Source address objects. Source address objects.	string	Maximum length: 79
dstaddr <name>	Destination address objects. Destination address objects.	string	Maximum length: 79
snat	Enable/disable substitution of the outgoing interface IP address for the original source IP address (called source NAT or SNAT).	option	-
	Option Description enable Enable source NAT. disable Disable source NAT.
snat-ip	IPv4 address to be used as the source address for NATed traffic.	ipv4-address	Not Specified
dnat	IPv4 DNAT address used for multicast destination addresses.	ipv4-address-any	Not Specified
action	Accept or deny traffic matching the policy.	option	-
	Option Description accept Accept traffic matching the policy. deny Deny or block traffic matching the policy.
protocol	Integer value for the protocol type as defined by IANA .	integer	Minimum value: 0 Maximum value: 255
start-port	Integer value for starting TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535
end-port	Integer value for ending TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535
auto-asic-offload	Enable/disable offloading policy traffic for hardware acceleration.	option	-
	Option Description enable Enable hardware acceleration offloading. disable Disable offloading for hardware acceleration.