config router static6

Configure IPv6 static routing tables.

config router static6

Description: Configure IPv6 static routing tables.

edit <seq-num>

set status [enable|disable]

set dst {ipv6-network}

set gateway {ipv6-address}

set device {string}

set devindex {integer}

set distance {integer}

set priority {integer}

set comment {var-string}

set blackhole [enable|disable]

set virtual-wan-link [enable|disable]

set link-monitor-exempt [enable|disable]

set bfd [enable|disable]

next

end

config router static6

Parameter	Description	Type	Size
status	Enable/disable this static route.	option	-
	Option Description enable Enable static route. disable Disable static route.
dst	Destination IPv6 prefix.	ipv6-network	Not Specified
gateway	IPv6 address of the gateway.	ipv6-address	Not Specified
device	Gateway out interface or tunnel.	string	Not Specified
devindex	Device index .	integer	Minimum value: 0 Maximum value: 4294967295
distance	Administrative distance .	integer	Minimum value: 1 Maximum value: 255
priority	Administrative priority .	integer	Minimum value: 0 Maximum value: 4294967295
comment	Optional comments.	var-string	Not Specified
blackhole	Enable/disable black hole.	option	-
	Option Description enable Enable black hole. disable Disable black hole.
virtual-wan-link	Enable/disable egress through the virtual-wan-link.	option	-
	Option Description enable Enable setting. disable Disable setting.
link-monitor-exempt	Enable/disable withdrawal of this static route when link monitor or health check is down.	option	-
	Option Description enable Enable withdrawal of this static route when link monitor or health check is down. disable Disable withdrawal of this static route when link monitor or health check is down.
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-
	Option Description enable Enable Bidirectional Forwarding Detection (BFD). disable Disable Bidirectional Forwarding Detection (BFD).