VXLAN over IPsec tunnel

This is an example of VXLAN over IPsec tunnel. VXLAN encapsulation is used in the phase1-interface setting and virtual-switch is used to bridge the internal with VXLAN over IPsec tunnel.

For more information, see .

Sample topology

Sample configuration

To configure VXLAN over an IPsec tunnel:

1. Configure the WAN interface and default route:
   1. HQ1:

      config system interface 
          edit "port1"
              set ip 172.16.200.1 255.255.255.0
          next
      end
      config router static
          edit 1
              set gateway 172.16.200.3
              set device "port1"
          next
      end

   2. HQ2:

      config system interface
          edit "port25"
              set ip 172.16.202.1 255.255.255.0 
          next    
      end
      config router static
          edit 1
              set gateway 172.16.202.2
              set device "port25"
          next
      end

2. Configure IPsec phase1-interface:
   1. HQ1:

      config vpn ipsec phase1-interface
          edit "to_HQ2"
              set interface "port1"
              set peertype any
              set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
              set encapsulation VXLAN
              set encapsulation-address ipv4
              set encap-local-gw4 172.16.200.1
              set encap-remote-gw4 172.16.202.1        
              set remote-gw 172.16.202.1
              set psksecret sample
              next
      end
      config vpn ipsec phase2-interface
          edit "to_HQ2"
              set phase1name "to_HQ2"
              set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
          next
      end

   2. HQ2:

      config vpn ipsec phase1-interface
          edit "to_HQ1"
              set interface "port25"
              set peertype any
              set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
              set encapsulation VXLAN
              set encapsulation-address ipv4
              set encap-local-gw4 172.16.202.1
              set encap-remote-gw4 172.16.200.1        
              set remote-gw 172.16.200.1
              set psksecret sample
              next
      end
      config vpn ipsec phase2-interface
          edit "to_HQ1"
              set phase1name "to_HQ1"
              set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
          next
      end

3. Configure the firewall policy:
   1. HQ1:

      config firewall policy
          edit 1
              set srcintf "dmz"
              set dstintf "to_HQ2"
              set srcaddr "10.1.100.0"
              set dstaddr "10.1.100.0"
              set action accept
              set schedule "always"
              set service "ALL"
          next
          edit 2
              set srcintf "to_HQ2"
              set dstintf "dmz"
              set srcaddr "10.1.100.0"
              set dstaddr "10.1.100.0"
              set action accept
              set schedule "always"
              set service "ALL"
          next
      end

   2. HQ2:

      config firewall policy
          edit 1
              set srcintf "port9"
              set dstintf "to_HQ1"
              set srcaddr "10.1.100.0"
              set dstaddr "10.1.100.0"
              set action accept
              set schedule "always"
              set service "ALL"
          next
          edit 2
              set srcintf "to_HQ1"
              set dstintf "port9"
              set srcaddr "10.1.100.0"
              set dstaddr "10.1.100.0"
              set action accept
              set schedule "always"
              set service "ALL"
          next
      end

4. Configure the virtual switch:
   1. HQ1:

      config system switch-interface
          edit "VXLAN-HQ2"
              set member "dmz" "to_HQ2"
              set intra-switch-policy explicit
          next
      end

   2. HQ2:

      config system switch-interface
          edit "VXLAN-HQ1"
              set member "port9" "to_HQ1"
              set intra-switch-policy explicit
          next
      end

5. Optionally, view the VPN tunnel list on HQ1 with the diagnose vpn tunnel list command:

   list all ipsec tunnel in vd 0
   ----
   name=to_HQ2 ver=1 serial=2 172.16.200.1:0->172.16.202.1:0
   bound_if=5 lgwy=static/1 tun=intf/0 mode=auto/1 encap=VXLAN/2 options[0002]=
   encap-addr: 172.16.200.1->172.16.202.1
   proxyid_num=1 child_num=0 refcnt=11 ilast=8 olast=0 ad=/0
   stat: rxp=13 txp=3693 rxb=5512 txb=224900
   dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=45
   natt: mode=none draft=0 interval=0 remote_port=0
   proxyid=to_HQ2 proto=0 sa=1 ref=2 serial=1
     src: 0:0.0.0.0/0.0.0.0:0
     dst: 0:0.0.0.0/0.0.0.0:0
     SA:  ref=3 options=10226 type=00 soft=0 mtu=1390 expire=41944/0B replaywin=2048
          seqno=e6e esn=0 replaywin_lastseq=0000000e itn=0
     life: type=01 bytes=0/0 timeout=42901/43200
     dec: spi=635e9bb1 esp=aes key=16 c8a374905ef9156e66504195f46a650c
          ah=sha1 key=20 a09265de7d3b0620b45441fb5af44dab125f2afe
     enc: spi=a4d0cd1e esp=aes key=16 e9d0f3f0bb7e15a833f80c42615a3b91
          ah=sha1 key=20 609a315c385471b8909b771c76e4fa7214996e50
     dec:pkts/bytes=13/4640, enc:pkts/bytes=3693/623240

6. Optionally, view the bridge control interface on HQ1 with the diagnose netlink brctl name host VXLAN-HQ1 command:

   show bridge control interface VXLAN-HQ1 host. 
   fdb: size=2048, used=17, num=17, depth=1
   Bridge VXLAN-a host table
   port no device  devname mac addr                ttl     attributes
     1      1.       dmz     00:0c:29:4e:33:c9        1.        Hit(1)
     1      1.       dmz     00:0c:29:a8:c3:ea       105      Hit(105)
     1      1.       dmz     90:6c:ac:53:76:29        18       Hit(18)
     1      1.       dmz     08:5b:0e:dd:69:cb        1.       Local Static
     1      1.       dmz     90:6c:ac:84:3e:5d        1.        Hit(5)
     1      1.       dmz     00:0b:fd:eb:21:d6        1.        Hit(0)
     2     38        to_HQ2  56:45:c3:3f:57:b4        1.       Local Static
     1      1.       dmz     00:0c:29:d2:66:40        78       Hit(78)
     2     38        to_HQ2  90:6c:ac:5b:a6:eb       124      Hit(124)
     1      1.       dmz     00:0c:29:a6:bc:e6        19       Hit(19)
     1      1.       dmz     00:0c:29:f0:a2:e7        1.        Hit(0)
     1      1.       dmz     00:0c:29:d6:c4:66       164      Hit(164)
     1      1.       dmz     00:0c:29:e7:68:19        1.        Hit(0)
     1      1.       dmz     00:0c:29:bf:79:30        19       Hit(19)
     1      1.       dmz     00:0c:29:e0:64:7d        1.        Hit(0)
     1      1.       dmz     36:ea:c7:30:c0:f1        25       Hit(25)
     1      1.       dmz     36:ea:c7:30:cc:71        1.        Hit(0)