config user fsso-polling
Description: Configure FSSO active directory servers for polling mode.
edit <id>
set status [enable|disable]
set server {string}
set default-domain {string}
set port {integer}
set user {string}
set password {password}
set ldap-server {string}
set logon-history {integer}
set polling-frequency {integer}
config adgrp
Description: LDAP Group Info.
edit <name>
next
end
set smbv1 [enable|disable]
set smb-ntlmv1-auth [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable polling for the status of this Active Directory server. enable: Enable setting. disable: Disable setting. |
option | - |
| server | Host name or IP address of the Active Directory server. | string | Maximum length: 63 |
| default-domain | Default domain managed by this Active Directory server. | string | Maximum length: 35 |
| port | Port to communicate with this Active Directory server. | integer | Minimum value: 0 Maximum value: 65535 |
| user | User name required to log into this Active Directory server. | string | Maximum length: 35 |
| password | Password required to log into this Active Directory server | password | Not Specified |
| ldap-server | LDAP server name used in LDAP connection strings. | string | Maximum length: 35 |
| logon-history | Number of hours of logon history to keep, 0 means keep all history. | integer | Minimum value: 0 Maximum value: 48 |
| polling-frequency | Polling frequency (every 1 to 30 seconds). | integer | Minimum value: 1 Maximum value: 30 |
| smbv1 | Enable/disable support of SMBv1 for Samba. enable: Enable support of SMBv1 for Samba. disable: Disable support of SMBv1 for Samba. |
option | - |
| smb-ntlmv1-auth | Enable/disable support of NTLMv1 for Samba authentication. enable: Enable support of NTLMv1 for Samba authentication. disable: Disable support of NTLMv1 for Samba authentication. |
option | - |
config user fsso-polling
Description: Configure FSSO active directory servers for polling mode.
edit <id>
set status [enable|disable]
set server {string}
set default-domain {string}
set port {integer}
set user {string}
set password {password}
set ldap-server {string}
set logon-history {integer}
set polling-frequency {integer}
config adgrp
Description: LDAP Group Info.
edit <name>
next
end
set smbv1 [enable|disable]
set smb-ntlmv1-auth [enable|disable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | Enable/disable polling for the status of this Active Directory server. enable: Enable setting. disable: Disable setting. |
option | - |
| server | Host name or IP address of the Active Directory server. | string | Maximum length: 63 |
| default-domain | Default domain managed by this Active Directory server. | string | Maximum length: 35 |
| port | Port to communicate with this Active Directory server. | integer | Minimum value: 0 Maximum value: 65535 |
| user | User name required to log into this Active Directory server. | string | Maximum length: 35 |
| password | Password required to log into this Active Directory server | password | Not Specified |
| ldap-server | LDAP server name used in LDAP connection strings. | string | Maximum length: 35 |
| logon-history | Number of hours of logon history to keep, 0 means keep all history. | integer | Minimum value: 0 Maximum value: 48 |
| polling-frequency | Polling frequency (every 1 to 30 seconds). | integer | Minimum value: 1 Maximum value: 30 |
| smbv1 | Enable/disable support of SMBv1 for Samba. enable: Enable support of SMBv1 for Samba. disable: Disable support of SMBv1 for Samba. |
option | - |
| smb-ntlmv1-auth | Enable/disable support of NTLMv1 for Samba authentication. enable: Enable support of NTLMv1 for Samba authentication. disable: Disable support of NTLMv1 for Samba authentication. |
option | - |