config firewall multicast-policy6

Configure IPv6 multicast NAT policies.

config firewall multicast-policy6

Description: Configure IPv6 multicast NAT policies.

edit <id>

set status [enable|disable]

set name {string}

set logtraffic [enable|disable]

set srcintf {string}

set dstintf {string}

set srcaddr <name1>, <name2>, ...

set dstaddr <name1>, <name2>, ...

set action [accept|deny]

set protocol {integer}

set start-port {integer}

set end-port {integer}

set auto-asic-offload [enable|disable]

next

end

config firewall multicast-policy6

Parameter	Description	Type	Size	Default
status	Enable/disable this policy.	option	-	enable
	Option Description enable Enable this policy. disable Disable this policy.
name	Policy name.	string	Maximum length: 35
logtraffic	Enable/disable logging traffic accepted by this policy.	option	-	disable
	Option Description enable Enable logging traffic accepted by this policy. disable Disable logging traffic accepted by this policy.
srcintf	IPv6 source interface name.	string	Maximum length: 35
dstintf	IPv6 destination interface name.	string	Maximum length: 35
srcaddr <name>	IPv6 source address name. Address name.	string	Maximum length: 79
dstaddr <name>	IPv6 destination address name. Address name.	string	Maximum length: 79
action	Accept or deny traffic matching the policy.	option	-	accept
	Option Description accept Accept. deny Deny.
protocol	Integer value for the protocol type as defined by IANA .	integer	Minimum value: 0 Maximum value: 255	0
start-port	Integer value for starting TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535	1
end-port	Integer value for ending TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535	65535
auto-asic-offload	Enable/disable offloading policy traffic for hardware acceleration.	option	-	enable
	Option Description enable Enable offloading policy traffic for hardware acceleration. disable Disable offloading policy traffic for hardware acceleration.