Adding a static default route

After you create a static route template, you can edit the template to add a new default route (0.0.0.0/0).

To add a default route to the static route template:

1. On the Provisioning Templates > Static Route Templates pane, double-click the static route template to open it for editing.

2. Click Create New, and set Type to IPv4.

3. Set Destination to Subnet and 0.0.0.0/0.0.0.0.

4. Enable SD-WAN, and specify the two SD-WAN zones separated by a comma (without space): underlay,overlay.

   

5. Click OK to save the static route.