Static route templates

We recommend using a Static Route Template to configure the default route through SD-WAN on all devices. We will also use the static route template and meta field to configure a static route towards the entire MPLS underlay transport network.

Following is a summary of the tasks to complete in Device Manager:

1. Create a static route template. See Creating a static route template.
2. Edit the static route template to add a default route. See Adding a static default route .
3. Assign the static route template to the Edge and Hub device groups. See Assigning the static route template.
4. Edit the static route template to add a static route towards the entire MPLS underlay transport network. See Adding a static route for the next-hop gateway .