Verifying IPsec VPN tunnels on the hub
To verify the IPsec VPN tunnels on the hub:
-
Go to Dashboard > Network and click the IPsec widget to expand it.
-
Verify that there are two tunnels established for each phase 1 interface.
The naming convention <tunnel_name>_<number> indicates the relative order in which the tunnels were established:
fabric_vpn_1_0
VPN tunnel listening on the hub’s WAN1 incoming interface; established with spoke 1 using its WAN1 interface
fabric_vpn_1_1
VPN tunnel listening on the hub’s WAN1 incoming interface; established with spoke 2 using its WAN1 interface
fabric_vpn_2_0
VPN tunnel listening on the hub’s WAN2 incoming interface; established with spoke 1 using its WAN2 interface
fabric_vpn_2_1
VPN tunnel listening on the hub’s WAN2 incoming interface; established with spoke 2 using its WAN2 interface