Configuring branch interfaces
You can use basic SD-WAN configurations on the branches to test ADVPN.
To configure the branch interface members:
- Go to Device Manager > SD-WAN.
- In the tree menu, click Interface Members.
- In the toolbar, click Create New.
Create the following interface members:
- OL_MPLS
- OL_INET
- port2
- port3
- Configure the interface settings keeping the following considerations in mind:
Property Description Gateway Make sure to specify the remote gateway for the overlay interfaces. Default interface Make sure to specify the suffix _0
for OL_MPLS and OL_INET. For example, OL_MPLS_0 and OL_INET_0.Per-Device Mapping Toggle ON. Advanced Options
Priority
Make sure to specify the priority for the OL_MPLS and OL_INET interfaces is higher than port2 and port3.
This will redirect the traffic that does not match an SD-WAN rule to the underlays in port2 and port3, instead of using ECMP for all the interface members of the SD-WAN.
OL_INET_0 configuration:
OL_MPLS_0 interface configuration: