SD-WAN History Monitoring
History graphs are now available for the SD-WAN Monitoring. You can View bandwidth, packet loss, latency and jitter history for each device / WAN-link interface and cloud applications. Additionally, the interface allows drill-down to selected time periods for deeper inspection of those events.
- Go to SD-WAN Monitoring > Table view. For each device / interface you can now see Bandwidth / Packet Loss / Latency / Jitter history
- Go to SD-WAN Monitoring > Table view. For each device, you can now see the interface status history.
- This feature is only for ADOM 6.2 and FortiOS 6.2.
- FortiOS 6.0 does not support history API and hence the drill-down is disabled in table view.
Enable or Disable SD-WAN History Monitoring
Enable/disable the SD-WAN history monitoring from the command line. The default is disable.
To enable SD-WAN History Monitoring:
config system admin setting
set sdwan-monitor-history enable
end
To disable SD-WAN History Monitoring:
config system admin setting
set sdwan-monitor-history disable
end
When SD-WAN History Monitoring is disabled
When SD-WAN history monitoring is disabled, go to SD-WAN Monitor> Table View to view the drill-down monitor. When disabled, FortiManager shows only the history for the last 10 minutes querying the data directly from FortiGate devices.
- Go to SD-WAN Monitoring > Table View. The drill-down is available to monitor Health Check History and Interface Status History.
- Go to SD-WAN Monitoring > Table view. For each device / interface you can now see Bandwidth Overview/ Traffic Overview.
- Go to SD-WAN Monitoring > Table view. For each device / interface you can now see Packet Loss / Latency / Jitter history.
- Go to SD-WAN Monitoring > Table view. For each application, you can now see Packet Loss / Latency / Jitter history.
