You can either manually set the FortiManager system time or configure the FortiManager unit to automatically keep its system time correct by synchronizing with a Network Time Protocol (NTP) server.
For many features to work
- Go to System Settings > Dashboard.
- In the System Information widget, click the edit system time button next to the System Time field.
- Configure the following settings to either manually configure the system time, or to automatically synchronize the FortiManager unit’s clock with an NTP server:
The date and time according to the FortiManager unit’s clock at the time that this pane was loaded or when you last clicked the Refresh button.
Select the time zone in which the FortiManager unit is located and whether or not the system automatically adjusts for daylight savings time.
Update Time By
Select Set time to manually set the time, or Synchronize with NTP Server to automatically synchronize the time.
Manually set the data and time.
Set the date from the calendar or by manually entering it in the format: YYYY/MM/DD.
Select the time.
Synchronize with NTP Server
Automatically synchronize the date and time.
Enter the IP address or domain name of an NTP server. Click the plus icon to add more servers. To find an NTP server that you can use, go to http://www.ntp.org.
Minimum poll interval in seconds as power of 2 (e.g. 6 means 64 seconds, default = 6).
Maximum poll interval in seconds as power of 2 (e.g. 6 means 64 seconds, default = 10).
- Click the checkmark to apply your changes.