Adding IP pool to LAN port configuration

To add IP pool to LAN port configuration:

1. Go to Configuration > Device.
2. Expand the region.

   The devices in the region are displayed.

3. Double-click the device to open it for editing.

   The Device / <name> dialog box is displayed.

4. Click the Network tab, and expand the LAN section.
5. Toggle Override to ON.
6. Double-click an interface to open it for editing.

   The LAN / <interface name> dialog box displays.

   

7. Create an IP pool:
   1. Beside IP Address, click Create IP Pool.

      The IP Pool dialog box is displayed.

      

   2. In the Name box, type a name for the IP pool.
   3. In the Pool box, type an IP address range.
   4. Click OK to save the changes.

      The IP pool is created. You can also view the IP pool by going to Configuration > Shared Resources > Network > Intranet IP Pool.

8. In the IP Address box, type the IP address range for the IP pool to select it.
9. Click OK to save the device override changes.
10. Install the configuration changes. See Installing configuration changes.