Multiple optimizations to the factory default SSID and AP-profiles 7.4.1

This information is also available in the FortiManager 7.4 Administration Guide: Using Fortinet recommended profiles

In FortiManager 7.4.1, there are multiple optimizations to the factory default SSID and AP-profiles.

• Fortinet recommended factory default SSIDs
• Fortinet recommended factory default AP Profiles
• Fortinet recommended factory default ARRP Profile

Fortinet recommended factory default SSIDs

• All three Fortinet recommended factory default SSID templates allow users to select the traffic mode as either Bridged or Tunnel when the templates are activated.

• The Corporate_Fortinet_Default SSID includes the following changes:

  • Dynamic VLAN Assignment - disabled by default.
    

  • multicast-enhance - enabled by default.
    

  • ft-over-ds - enabled by default.
    

• The Guest_Fortinet_Default SSID includes the following changes:

  • Device Detection - enabled by default.
    

  • multicast-enhance - enabled by default.
    

• The POS_Fortinet_Default SSID includes the following changes:

  • multicast-enhance - enabled by default.
    

Fortinet recommended factory default AP Profiles

• For the 2.4 GHz band, set the default 802.11 ax/n/g (for WiFi6/6E/6 (Smart Series)).
  

• For the 2.4 GHz band, only allow 20MHz channel width.
  

• Enforce the 2.4 GHz radio 1 on Three Channels (some profiles are on three channels "custom").
  

• For the 5 GHz band (radio 2), set to 802.11 ax/ac/n/a (for WiFi6/6E/6 (Smart Series)).
  

• Enable all radios by default.
  
  
  

• Short Guard Interval - enabled by default on all radios.
  

• Transmit Power Mode - set to Auto by default on all radios.
  

Fortinet recommended factory default ARRP Profile

• darrp-optimize-schedules - The default-darrp-optimize schedule in the profile is selected by default.