VPN Monitoring displays IPsec VPN tunnels created by IPsec templates and SD-WAN overlay wizard
This information is also available in the FortiManager 7.4 Administration Guide: |
VPN Monitoring displays IPSec VPN tunnels created by IPsec Templates and the SD-WAN Overlay Wizard with specific device icon identification for HUBs and the ability to drilldown to a device group level.
To view IPsec tunnel template information in the VPN Monitor:
- Go to Device Manager > Monitors > VPN Monitor.
The VPN Monitor displays all IPsec VPN tunnel information created with the VPN Manager, IPsec template, or created directly on FortiOS. - The map includes the following information:
- Green lines indicate that a tunnel is up.
- When the green lines are animated, there is traffic flowing through the VPN tunnels.
- You can hover your mouse over a green line to view the VPN tunnel name and source port information.
- When the green lines are animated, there is traffic flowing through the VPN tunnels.
- Red lines indicate that a tunnel is down.
- HUB device(s) are identified with a star icon.
- Green lines indicate that a tunnel is up.
- To view a single device's IPsec VPN tunnel information, change All to Others in the toolbar menu, and select a device from the dropdown.
- To view a device group's IPsec VPN tunnel information, change All to Others in the toolbar menu, and select a device group from the dropdown.
- To view IPsec VPN tunnel information in a table, select the Show Table option from the toolbar and the table will be displayed under the map.