Configuring an address
|
Address and address group firewall objects support IPv6 addresses. |
To configure an address:
- Go to Security > Firewall Objects.
- Select Address in the firewall object type dropdown.
- In the Create dropdown, select Address or select an existing address from the list and click Edit.
- In the form, enter the following information:
Settings
Guidelines
Name
Required. Enter a name for the address.
Color
From the dropdown, select a color option.
Type
Required. Select a type from the following options in the dropdown:
Subnet (default)
IP Range
FQDN
Geography
Device (MAC Address)
IP/Netmask
Required. Enter the IP address and the netmask.
Note: This option is only available when the Type is Subnet.
IP Range
Required. Enter the IP address range.
Note: This option is only available when the Type is IP Range.
FQDN
Required. Enter the Fully Qualified Domain Name (FQDN).
Note: This option is only available when the Type is FQDN.
Geography/Region
Required. Select a country/territory from the dropdown.
Note: This option is only available when the Type is Geography.
MAC Address
Click + and enter the MAC addresses.
Note: This option is only available when Type is Device (MAC Address).
Interface
Required. Select the device interface.
Comments
Enter comments about the address.
- Click Save.