Configuration
View or edit the configuration for each managed WAN extender device.
The following actions are available:
-
Add or edit an extender
-
Add or edit an extender profile
To add or edit an extender:
- In WAN> Configuration > Managed Extenders:
- Click Create New to add a new extender.
- Select an item from the list and click Edit to edit an existing extender.
- In the form, enter or update the following information:
-
Field
Required
Description
Serial number
Y
Enter the device serial number.
Mode
Y
Select from the following:
-
WAN Extension
-
LAN Extension
Profile
Y
Select an existing extender profile. See To add or edit an extender profile.
Status
Y
Specify the authorization status.
Select from the following options:
-
Deauthorize
-
Reject
-
Authorize
Override Management Access
N
Enable or disable overriding management access permission, then select the access to allow.
Override Login Password
N
Enable or disable login password override, then specify the password.
-
-
Click Save.
The extender is created and added to the list.
To add or edit an extender profile:
-
In WAN> Configuration > Profiles:
-
Click Create New to add a new extender profile.
-
Select an item from the list and click Edit to edit an existing extender profile.
-
- In the form, enter or update the following information:
-
Field
Required
Description
Name
Y
Enter a name for the profile.
Model
Y
Select the extender model.
Mode
Y
Select from the following:
-
WAN Extension
-
LAN Extension
Data plan
Y
Select a data plan.
Management Access
N
Select the management access permission to allow.
Login Password
N
Specify the password.
Link load balance
N
Select the load balance mode from the following:
-
Active backup
-
Load balance
This option is only available when Mode is set to LAN Extension.
IPsec Interface
Y
Select the IPsec interface.
This option is only available when Mode is set to LAN Extension.
IPsec Interface IP/FQDN
N
Enter the public IP address or FQDN of the IPsec interface.
This option is only available when Mode is set to LAN Extension.
Uplink Port
N
Select an upllink port from the list of click Create to add a new uplink port. See To add or edit an uplink port.
This option is only available when Mode is set to LAN Extension.
Modem n
N The number of modems varies by selected model.
Default SIM
N Select the SIM to use for this modem.
If Carrier is selected, enter the Preferred carrier.
SIM 1 PIN
N Enable disable a PIN for SIM 1, then enter a PIN.
SIM 1 PIN
N Enable disable a PIN for SIM 1, then enter a PIN.
GPS
N Enable or disable GPS.
Auto SIM Switch
N Select when SIMs should be switched.
By disconnecting
N Enable or disable switching by disconnecting, then enter the Disconnect threshold and Disconnect checking period.
By signal
N Enable or disable switching by signal.
By data plan
N Enable or disable switching by data plan.
Controller Report
N Enable or disable the controller report, then enter the Interval and Signal Threshold for reporting.
-
-
Click Save.
The extender profile is created and added to the list.
To add or edit an uplink port:
- In the WAN extender profile form, in Uplink Port:
- Click Create New to add a new uplink port.
- Select an item from the list and click Edit to edit an existing uplink port.
- In the form, enter or update the following information:
-
Field
Required
Description
Name
Y
Enter a name for the port.
Uplink port
Y
Select the port from the list.
Role
Y
Select the role.
-
Click Save.
The uplink port is created and added to the list.