Edit port configuration

To edit port configuration:

1. In Switch > Configuration > Port Configuration, select the appropriate site and switch.

2. Select a port and click Edit.

3. In the form, enter or update the following information:

   Field	Required	Description
   Port	Y	The port name. This field is not editable.
   Port Status	Y	Enable or disable the port.
   Native VLAN	Y	Enter the native VLAN for this port.
   Allowed VLANs	N	Select the VLANs allowed on this port.
   Edge Port	Y	Enable or disable this port as an edge port.
   STP Status	Y	Enable or disable STP on this port.
   PoE Status	Y	Enable or disable PoE on this port.
   DHCP Snooping	Y	Set this port as Trusted or Untrusted for DHCP.

4. Click Save.