switch-controller
Use switch-controller commands to configure a host of options related to managing an external FortiSwitch unit.
This section includes syntax for the following commands:
- switch-controller 802-1X-settings
- switch-controller custom-command
- switch-controller global
- switch-controller igmp-snooping
- switch-controller lldp-profile
- switch-controller lldp-settings
- switch-controller mac-sync-settings
- switch-controller managed-switch
- switch-controller qos dot1p-map
- switch-controller qos ip-dscp-map
- switch-controller qos qos-policy
- switch-controller qos queue-policy
- switch-controller quarantine
- switch-controller security-policy 802-1X
- switch-controller security-policy captive-portal
- switch-controller sflow
- switch-controller storm-control
- switch-controller stp-settings
- switch-controller switch-group
- switch-controller switch-interface-tag
- switch-controller switch-log
- switch-controller switch-profile
- switch-controller system
- switch-controller virtual-port-pool
- switch-controller vlan
Note that the following commands have been removed since the release of FortiOS 6.0:
- switch-controller quarantine