tracert6
Test the connection between the FortiGate unit and another network device using IPv6 protocol, and display information about the network hops between the device and the FortiGate unit.
Syntax
execute tracert6 Traceroute for IPv6.
You can use the following options:
| Variable | Description |
|---|---|
| -F | Set Don’t Fragment bit. |
| -d | Enable debugging. |
| -n | Do not resolve numeric address to domain name. |
| -f <first_ttl> | Set the initial time-to-live used in the first outgoing probe packet. |
| -i <interface> | Select interface to use for tracert. |
| -m <max_ttl> | Set the max time-to-live (max number of hops) used in outgoing probe packets. |
| -s <src_addr> | Set the source IP address to use in outgoing probe packets. |
| -q <nprobes> | Set the number probes per hop. |
| -w <waittime> | Set the time in seconds to wait for response to a probe. Default is 5. |
| -z <sendwait> | Set the time in milliseconds to pause between probes. |
| host | Enter the IP address or FQDN to probe. |
| <paddatalen> | Set the packet size to use when probing. |