Fortinet black logo

CLI Reference

system mobile-tunnel

system mobile-tunnel

Introduction.

config system mobile-tunnel
    edit {name}
    # Configure Mobile tunnels, an implementation of Network Mobility (NEMO) extensions for Mobile IPv4 RFC5177.
        set name {string}   Tunnel name. size[15]
        set status {disable | enable}   Enable/disable this mobile tunnel.
        set roaming-interface {string}   Select the associated interface name from available options. size[15] - datasource(s): system.interface.name
        set home-agent {ipv4 address}   IPv4 address of the NEMO HA (Format: xxx.xxx.xxx.xxx).
        set home-address {ipv4 address}   Home IP address (Format: xxx.xxx.xxx.xxx).
        set renew-interval {integer}   Time before lifetime expiraton to send NMMO HA re-registration (5 - 60, default = 60). range[5-60]
        set lifetime {integer}   NMMO HA registration request lifetime (180 - 65535 sec, default = 65535). range[180-65535]
        set reg-interval {integer}   NMMO HA registration interval (5 - 300, default = 5). range[5-300]
        set reg-retry {integer}   Maximum number of NMMO HA registration retries (1 to 30, default = 3). range[1-30]
        set n-mhae-spi {integer}   NEMO authentication SPI (default: 256). range[0-4294967295]
        set n-mhae-key-type {ascii | base64}   NEMO authentication key type (ascii or base64).
                ascii   The authentication key is an ASCII string.
                base64  The authentication key is Base64 encoded.
        set n-mhae-key {string}   NEMO authentication key.
        set hash-algorithm {hmac-md5}   Hash Algorithm (Keyed MD5).
                hmac-md5  Keyed MD5.
        set tunnel-mode {gre}   NEMO tunnnel mode (GRE tunnel).
                gre  GRE tunnel.
        config network
            edit {id}
            # NEMO network configuration.
                set id {integer}   Network entry ID. range[0-4294967295]
                set interface {string}   Select the associated interface name from available options. size[15] - datasource(s): system.interface.name
                set prefix {ipv4 classnet}   Class IP and Netmask with correction (Format:xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx or xxx.xxx.xxx.xxx/x).
            next
    next
end

system mobile-tunnel

Introduction.

config system mobile-tunnel
    edit {name}
    # Configure Mobile tunnels, an implementation of Network Mobility (NEMO) extensions for Mobile IPv4 RFC5177.
        set name {string}   Tunnel name. size[15]
        set status {disable | enable}   Enable/disable this mobile tunnel.
        set roaming-interface {string}   Select the associated interface name from available options. size[15] - datasource(s): system.interface.name
        set home-agent {ipv4 address}   IPv4 address of the NEMO HA (Format: xxx.xxx.xxx.xxx).
        set home-address {ipv4 address}   Home IP address (Format: xxx.xxx.xxx.xxx).
        set renew-interval {integer}   Time before lifetime expiraton to send NMMO HA re-registration (5 - 60, default = 60). range[5-60]
        set lifetime {integer}   NMMO HA registration request lifetime (180 - 65535 sec, default = 65535). range[180-65535]
        set reg-interval {integer}   NMMO HA registration interval (5 - 300, default = 5). range[5-300]
        set reg-retry {integer}   Maximum number of NMMO HA registration retries (1 to 30, default = 3). range[1-30]
        set n-mhae-spi {integer}   NEMO authentication SPI (default: 256). range[0-4294967295]
        set n-mhae-key-type {ascii | base64}   NEMO authentication key type (ascii or base64).
                ascii   The authentication key is an ASCII string.
                base64  The authentication key is Base64 encoded.
        set n-mhae-key {string}   NEMO authentication key.
        set hash-algorithm {hmac-md5}   Hash Algorithm (Keyed MD5).
                hmac-md5  Keyed MD5.
        set tunnel-mode {gre}   NEMO tunnnel mode (GRE tunnel).
                gre  GRE tunnel.
        config network
            edit {id}
            # NEMO network configuration.
                set id {integer}   Network entry ID. range[0-4294967295]
                set interface {string}   Select the associated interface name from available options. size[15] - datasource(s): system.interface.name
                set prefix {ipv4 classnet}   Class IP and Netmask with correction (Format:xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx or xxx.xxx.xxx.xxx/x).
            next
    next
end