Upgrading Firmware

Run the execute restore image command to upgrade the firmware. The firmware image is loaded from an FTP server or a TFTP server. For example, run execute restore image ftp <FortiGuest Image location> <FTP Server IP> <username> <password> command, where:

• <FortiGuest Image location> is the path to the FortiGuest firmware image on the FTP server.

• <FTP Server IP> is the IP address of the FTP server.

• <username> is the username for the FTP server.

• <password> is the password for the FTP server.

For complete list of supported commands, see Command Line Interface (CLI) Reference