Servers

Configure an isolator server for the FortiProxy to forward isolation requests to.

To configure an isolator server in the GUI, go to Policy & Objects > Isolator Setting > Servers, select an existing isolator server and then click Edit or click Create New to create a new one. Configure the following options, and click OK.

Name	Enter the name of the isolator server.
Comments	Enter an optional description of the isolator server.
Address Type	Select the type of isolator server address, either IP or FQDN.
IP	If you selected IP for the address type, enter the IP address of the isolator server.
FQDN	If you selected FQDN for the address type, enter the fully qualified domain name of the isolator server.
Port	Enter the port number of the isolator server.

To configure an isolator server in the CLI, use the config web-proxy isolator-server command.