Fortinet black logo

Administration Guide

Home FortiProxy 7.4.2 Administration Guide
7.4.2
7.4.4
7.4.3
7.4.2
7.4.1
7.4.0
7.2.10
7.2.9
7.2.8
7.2.7
7.2.0
7.0.17
7.0.0
2.0.0
1.2.0
1.1.0
1.0.0

Profiles

Profiles

Configure an isolator profile to define the isolation behavior.

To configure an isolator profile in the GUI, go to Policy & Objects > Isolator Setting > Profiles, select an existing isolator profile and then click Edit or click Create New to create a new one. Configure the following options, and click OK.

Name

Enter the name of the isolator profile.

Comments

Enter an optional description of the isolator profile.

Entries

Select an existing entry and click Edit or click Create New to create a new one. Configure the following options and click OK:

Proxy Address Select the proxy address for this isolator profile entry.
Action

Select the action for this isolator entry:

  • Isolate—Open the website in an isolator instead of the client.

  • Freeze—Freeze the website. The user is able to unfreeze and get access to the website when they accept the risk.

  • Block—Block the traffic to the website.

  • Allow—Bypass the traffic to the website.
Referer Host Host of the referer.
Right Click Specifies whether to allow client users to right click on mouse to display a menu.
Copy/Paste Specifies whether to allow client users to copy and paste from keyboard.
Status Enable/disable this isolator entry.

To configure an isolator profile in the CLI, use the config isolator profile command.

Previous
Next

Profiles

Configure an isolator profile to define the isolation behavior.

To configure an isolator profile in the GUI, go to Policy & Objects > Isolator Setting > Profiles, select an existing isolator profile and then click Edit or click Create New to create a new one. Configure the following options, and click OK.

Name

Enter the name of the isolator profile.

Comments

Enter an optional description of the isolator profile.

Entries

Select an existing entry and click Edit or click Create New to create a new one. Configure the following options and click OK:

Proxy Address Select the proxy address for this isolator profile entry.
Action

Select the action for this isolator entry:

  • Isolate—Open the website in an isolator instead of the client.

  • Freeze—Freeze the website. The user is able to unfreeze and get access to the website when they accept the risk.

  • Block—Block the traffic to the website.

  • Allow—Bypass the traffic to the website.
Referer Host Host of the referer.
Right Click Specifies whether to allow client users to right click on mouse to display a menu.
Copy/Paste Specifies whether to allow client users to copy and paste from keyboard.
Status Enable/disable this isolator entry.

To configure an isolator profile in the CLI, use the config isolator profile command.

Previous
Next