Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Standalone mode

When FortiClient is running in standalone mode, the Compliance & Telemetry tab is visible, but not used. The Compliance & Telemetry tab is labeled Disconnected.

If you want to use the compliance feature, you must connect FortiClient Telemetry to FortiGate.

The Compliance & Telemetry tab displays the following information:

FortiGate or EMS IP

Type the IP address or FQDN of FortiGate or EMS, and click Connect to connect FortiClient Telemetry.

Connect

Click to connect to FortiGate or EMS after populating the FortiGate or EMS box with an IP address.

Standalone mode

When FortiClient is running in standalone mode, the Compliance & Telemetry tab is visible, but not used. The Compliance & Telemetry tab is labeled Disconnected.

If you want to use the compliance feature, you must connect FortiClient Telemetry to FortiGate.

The Compliance & Telemetry tab displays the following information:

FortiGate or EMS IP

Type the IP address or FQDN of FortiGate or EMS, and click Connect to connect FortiClient Telemetry.

Connect

Click to connect to FortiGate or EMS after populating the FortiGate or EMS box with an IP address.