Fortinet black logo

Version:

7.2.1
7.2.0
7.0.9

Version:

7.0.8
7.0.7
7.0.6

Version:

7.0.4
7.0.3
7.0.2

Version:

7.0.1
7.0.0
6.4.9

Version:

6.4.8
6.4.7
6.4.4

Version:

6.4.3
6.4.2
6.4.1

Version:

6.4.0
6.2.9
6.2.8

Version:

6.2.7
6.2.6
6.2.4

Version:

6.2.3
6.2.2
6.2.1

Version:

6.2.0
6.0.8
6.0.6

Version:

6.0.5
6.0.4
6.0.3

Version:

6.0.2
6.0.1
6.0.0

Table of Contents

EMS Administration Guide

6.0.6
7.2.1
7.2.0
7.0.9
7.0.8
7.0.7
7.0.6
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.9
6.4.8
6.4.7
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.9
6.2.8
6.2.7
6.2.6
6.2.4
6.2.3
6.2.2
6.2.1
6.2.0
6.0.8
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
Download PDF
Copy Doc ID 5cf92a7e-71ae-11e9-81a4-00505692583a:55703
Copy Link

IP address group assignment rules

You can create a group assignment rule to automatically place all endpoints within a specified subnet or IP address range into the same custom group. In this situation, the process is as follows:

  1. In FortiClient EMS, create an IP address group assignment rule that requires endpoints within a certain subnet or IP address range to be placed into the desired group. See Adding an IP address group assignment rule.
  2. With the next FortiClient Telemetry communication, endpoints within the specified subnet or IP address range are placed in the specified group.
Previous
Next

IP address group assignment rules

You can create a group assignment rule to automatically place all endpoints within a specified subnet or IP address range into the same custom group. In this situation, the process is as follows:

  1. In FortiClient EMS, create an IP address group assignment rule that requires endpoints within a certain subnet or IP address range to be placed into the desired group. See Adding an IP address group assignment rule.
  2. With the next FortiClient Telemetry communication, endpoints within the specified subnet or IP address range are placed in the specified group.
Previous
Next