Known Issues
The following issues have been identified in 7.2.3. To inquire about a particular bug or to report a bug, please contact Customer Service & Support.
AP Manager
|
Bug ID |
Description |
|---|---|
| 865486 |
The FortiManager's AP Manager permits the use of invalid channels with a 40MHz channel width. |
| 884233 | FortiManager displays the AP critical security vulnerability info even after FortiAPs are being upgraded. |
| 892773 | Assigning AP Profile returns invalid value. |
Device Manager
|
Bug ID |
Description |
|---|---|
| 768289 | There is a discrepancy in the usage of quotation marks ("") when configuring DHCP relay from FortiManager or retrieving it from FortiGate. |
| 831624 | SD-WAN Monitor under the
Monitors displays time frame as "invalid date - invalid date". |
|
895001 |
The " |
| 896127 | When attempting to create a VLAN type with a name longer than 15 characters, FortiManager displays an error message. |
| 896367 | The geographic coordination
config of FortiGates on Device Manager is being reset to 0,0 after a certain period
of time. |
| 899350 | Promote button is missing for FortiGate 80F Clusters. |
| 899541 | An error message, "upgrade image failed", is shown even though the upgrade has been completed successfully. |
|
902908 |
Managed FortiAnalyzer is not listed under System Template. |
| 905869 | Invalid default value for VRF ID is observed when creating static route. |
| 910391 | When FortiManager operates in a non-default workspace mode, it may attempt to purge the configuration of the FortiGate devices due to database corruption. |
| 911535 | Adding a Model device with MetaVariables changes the status of other devices which using the MetaVariables to Modified/unknown. |
| 915361 | FortiWiFi devices are displayed in FortiManager under the Vulnerable devices as FortiAP. |
| 917969 | FortiManager is unable to search static routes via its interface name. |
| 919613 | When using a space character in
"psksecret", the FortiManager is unable to install the "psksecret" and displays an
error message. |
|
921094 |
In 6.2 or 6.4 ADOMs, problems might occur when attempting to add or modify static routes. Workarounds: Please create a fresh backup of your FMG and FGT, and then try either of the following:
|
| 925546 | Assigned Devices on Provisioning Template/CLI Template shows incorrect VDOM. |
| 925684 | Only a maximum of 10 devices can be previewed before installation using "install preview". |
|
925854 |
FortiManager fails to load the security fabric data for FortiGates (Versions 7.0.5+ & 7.2.5). |
| 931736 | Adding a new cli template script into existing cli template group changes order of cli templates to alphabetical order. |
| 936544 | When importing CLI Templates, GUI displays a blank page. |
FortiSwitch Manager
|
Bug ID |
Description |
|---|---|
| 881766 | Event logs or task manager do not show which user authorized a FortiSwitch. |
| 947651 | Per-device under the FortiSwitch Manager cannot edit FortiSwitch name and GUI returns error "invalid value". |
Global ADOM
|
Bug ID |
Description |
|---|---|
| 894714 | FortiManager does not allow creating/modification or removing the per-device mapping in global objects in assigned ADOM. |
| 925188 | The per-device mapping for any assigned global objects cannot be modified. |
Others
|
Bug ID |
Description |
|---|---|
| 703585 | FortiManager may return 'Connection aborted' error with JSON API request. |
| 777831 | When FortiAnalyzer is added as a managed device to FortiManager, "Incident & Event" tile will be displayed instead of the "FortiSoC". |
| 880465 | TCP ports 8902 & 8903 are opened and in listening mode after the upgrade. |
| 885665 | Unable to specify type of objects in FortiProxy ADOM. |
| 894947 | FortiManager fails to trigger the event handler for its local events after enabling the FortiAnalyzer features. |
| 895982 | Admin with a super user profile is not able to create the Firmware Template when FortiManager is working in the Workflow mode. |
| 900512 |
FortiManager ADOM Upgrade fails with the error message: "Peer type cannot be peer when authentication method is pre-share key". |
| 910175 | When provisioning the FortiExtender via CLI template, FortiManager displays the "mismatch interface" error message. |
| 914027 | FortiManager does not display/use the latest ISDB version for all of its ADOMs. |
| 916463 | The approval emails are not being sent to the "Email Notification" admins when a new session is created and submitted for approval. |
| 918129 | FortiManager does not support the AWS Security Token Service in AWS SDN connector. |
| 919981 | Installation fails to Azure FortiGate standalone as FortiManager attempts to set the peervd to "root". |
| 921273 | Unable to upgrade ADOMs due to the XSS vulnerability characters check on wireless-controller. |
|
925778 |
FortiGates are displayed Offline and Inactive on FortiWLM MEA. |
|
927379 |
FortiGuard Firmware does not suggest version 7.2.3 to upgrade. |
| 930425 | When downloading the install preview, the file name does not include the timestamp. |
Policy & Objects
|
Bug ID |
Description |
|---|---|
| 751443 |
FortiManager displays policy installation copy failures error when ipsec template gets unassigned. Workaround: Instead of unassigning IPSec template, modify IPSec template, replace the reference to IPSec tunnel interface with another interface. Please ensure a fresh FortiManager backup is created prior to any changes. |
| 780058 | FortiManager's GUI does not support
the "src-vendor-mac" objects
in Firewall policy. |
| 845022 | SDN Connector failed to import objects from VMware VSphere. |
| 855073 | The "where used" feature does not function properly. |
| 863819 | Unable to delete unused objects. |
| 873358 | Installation fails as FortiManager tries
to set "cgn-client-startip" and "cgn-client-endip"
settings when ippool object has been modified. |
| 880418 | The default values of the Application Control Profile entries cannot be changed. |
| 883064 | If any admin makes changes to "Object Selection Pane", either setting it to "Dock to Right", "Dock to Bottom" or "Classic Dual Pane", it will affect all other Admin's GUI preferences. |
| 889586 | Azure Service Tags not displayed correctly in FortiManager. |
| 896461 | FortiManager disables ip6-send-adv after
opening and closing interface configuration. |
| 898883 | Exported firewall policies do not contain firewall address values IP, netmask, and other details. |
| 902298 | FortiManager does not generate error messages when invalid or obsolete application IDs are used in the policy. Instead, it allows installation and sets the category to "pass" or "monitor". |
| 912114 | FortiManager is unable to import OpenStack SDN connector and the following error message is displayed: "send_sdn_connector_openstack_cmd: Failed to get openstack token". |
| 914945 | Unable to modify or clone the "SSL/SSH inspection profile" in the Policy & Object on the ADOM 7.0 version. |
| 914981 | In Policy & Objects, local policy is not displayed if view mode "Interface pair view" is selected. |
| 916459 | The option "Allow Websites When a Rating Error Occurs" is not being saved correctly in the default web filter. |
|
919415 |
Unable to "Edit" and "Delete" Installation Target after enable classic dual pane mode. |
| 919681 | The incoming and outgoing interfaces are not loading after creating a custom policy package in a 7.2 FortiGate ADOM. |
| 920740 | Unable to create a per-device mapping for a virtual server. |
| 922648 | FortiManager unable to push WiFi SSID to FortiGates. |
| 924680 | Policy packages containing geo-based ISDB objects may not be successfully installed to the FortiGates. |
| 925058 | "Web URL Filter" entries are not visible in the Web Filter Profile. |
| 925076 | FortiManager tries to install different preconnection-id under VPN SSL WEB Portal > Profile > Bookmark-Group > Gui-Bookmark > Book. |
| 939979 | After editing authentication-rule/portal mapping, FortiManager installs unexpected changes to these rules. |
Revision History
|
Bug ID |
Description |
|---|---|
| 904710 | Restoring a revision of a policy removes the information of all the SD-WAN rules. |
Script
|
Bug ID |
Description |
|---|---|
| 801614 | FortiManager might display an error message, "Failed to create a new revision." for some FortiGates, when retrieving their configurations. |
| 913360 | Device script is trying to add additional configuration; therefore, installation fails. |
| 923966 | When FortiManager is operating in Workspace mode, there are no options to save changes after executing a CLI script. |
| 931196 | Scheduled Scripts created by the ldap users cannot be run and FortiManager displays "Data is not ready" error message. |
System Settings
|
Bug ID |
Description |
|---|---|
| 825319 | FortiManager fails to promote a FortiGate HA member (running on firmware 7.2.0 to 7.2.4) to the Primary. |
| 861997 | Unable to delete a particular non-default empty ADOM. |
| 890956 | SAML SSO Authentication only works with the default local certs. |
VPN Manager
|
Bug ID |
Description |
|---|---|
| 784385 |
If policy changes are made directly on the FortiGates, the subsequent PP import creates faulty dynamic mappings for VPN Manager. Workaround: It is strongly recommended to create a fresh backup of the FortiManager's configuration prior to the workaround. Perform the following command to check & repair the FortiManager's configuration database. diagnose cdb check policy-packages <adom> After running this command, FortiManager will remove the invalid mappings of vpnmgr interfaces. |
| 847479 | Despite being configured for 'SHA-256,' FortiManager is installing 'SHA-1' certificates on FortiGates. |
| 863424 | The "Latest Patch Level" should be available with action "Check-up-to-date" under the SSL VPN Portal. |
|
923221 |
Provision Template - IPsec Tunnel: cannot Activate IPsec_Fortinet_Recommended. GUI returns error. |
| 931564 | In VPN Manager, ipsec vpn map, topology view, and traffic view does not display map normally. |
