Private Cloud K8s SDN connector

FortiOS automatically updates dynamic addresses for Kubernetes (K8S) by using a K8S SDN connector, enabling FortiOS to manage K8S pods as global address objects, as with other connectors. This includes mapping the following attributes from K8S instances to dynamic address groups in FortiOS:

Filter	Description
Namespace	Filter service IP addresses in a given namespace.
ServiceName	Filter service IP addresses by the given service name.
NodeName	Filter node IP addresses by the given node name.
Label.XXX	Filter service or node IP addresses with the given label XXX.

To configure K8S SDN connector using the GUI:

1. Configure the K8S SDN connector:
   1. Go to Security Fabric > Fabric Connectors.
   2. Click Create New, and select Kubernetes.
   3. Configure as shown substituting the IP address, port number, and secret token for your deployment. The update interval is in seconds.

      

2. Create a dynamic firewall address for the configured K8S SDN connector:
   1. Go to Policy & Objects > Addresses.
   2. Click Create New, then select Address.
   3. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the K8S SDN connector will automatically populate and update IP addresses only for node instances that match the specified node name:

      

3. Ensure that the K8S SDN connector resolves dynamic firewall IP addresses:
   1. Go to Policy & Objects > Addresses.
   2. Hover over the address created in step 2 to see a list of IP addresses for node instances that match the node name configured in step 2:

      

To configure K8S SDN connector using CLI commands:

1. Configure the K8S SDN connector:

   config system sdn-connector

   edit "kubernetes1"

   set type kubernetes

   set server "172.18.64.38"

   set server-port 6443

   set secret-token xxxxx

   set update-interval 30

   next

   end

2. Create a dynamic firewall address for the configured K8S SDN connector with the supported K8S filter. In this example, the K8S SDN connector will automatically populate and update IP addresses only for node instances that match the specified node name:

   config firewall address

   edit "k8s_nodename"

   set type dynamic

   set sdn "kubernetes1"

   set filter "K8S_NodeName=van-201669-pc1"

   next

   end

3. Confirm that the K8S SDN connector resolves dynamic firewall IP addresses using the configured filter:

   config firewall address

   edit "k8s_nodename"

   set uuid 462112a2-1ab1-51e9-799c-652621ba8c0c

   set type dynamic

   set sdn "kubernetes1"

   set filter "K8S_NodeName=van-201669-pc1"

   config list

   edit "172.16.65.227"

   next

   end

   next

   end