Configurable SD-WAN monitor data with custom disk usage 7.2.2
To configure the SD-WAN monitor data:
-
In the FortiManager CLI, enable SD-WAN monitor history.
config system admin setting
set sdwan-monitor-history enable
end
-
You can configure SD-WAN monitoring history using the following commands in the CLI.
-
rtm-max-monitor-by-days
: Maximum RTM monitor (sd-wan, traffic shaping, etc) history by days (1-180). -
rtm-temp-file-limit
: Set the RTM monitor temp file limit by hours. A lower value will reduce disk usage, but may cause data loss (1 -120).
For example:
config system admin setting
set sdwan-monitor-history enable
set rtm-max-monitor-by-days <60>
set rtm-temp-file-limit <48>
-