Create or edit a class
From the New Shaping Profile window or the Edit Shaping Profile window, you can create or edit a class. Select Create New to open the Create Class window. To change a class, select the class and then click Edit.
Configure the following settings in the Create Class window or the Edit Class window and then click OK:
Name | Enter the name of the class. |
Class ID | Enter the class identifier. The range is 2-31. |
Priority | Select the priority: Top, Critical, High, Medium, or Low. |
Guaranteed Bandwidth | Enter the percentage, from 0 to 100. |
Maximum Bandwidth | Enter the percentage, from 1 to 100. The Maximum Bandwidth must be equal or greater than the Guaranteed Bandwidth. |