Using FortiNDR inline scanning with antivirus

FortiNDR (formerly FortiAI) can be used with antivirus profiles in FortiProxy. FortiNDR inspects high-risk files and issues a verdict to the firewall based on how close the file features match those of malware. When enabled, FortiNDR can log, block, ignore, or monitor (allow) the file based on the verdict.

A licensed FortiNDR appliance with version 1.5.1 or later is required to use this feature.

To configure FortiNDR inline inspection with an AV profile:

1. Configure FortiNDR to join a Security Fabric in FortiProxy:

   1. Enable Security Fabric on FortiProxy using the following command:

      config system csf
      	set status enable
      	set group-name "fabric-ai"
      end

   2. Configure the interface to allow other devices to join the FortiProxy Security Fabric:

      config system interface
          edit "port1"
              set allowaccess ping https ssh http fgfm fabric
          next
      end

   3. In FortiNDR, configure the device to join the Security Fabric:

      config system csf
      	set status enable
      	set upstream-ip 10.6.30.14
      	set managment-ip 10.6.30.251
      end

   4. Authorize the FortiNDR in FortiProxy:

      config system csf
      	config trusted-list
      		edit "FAIVMSTM21000000"
      			set authorization-type certificate
      			set certificate "*******************"
      		next
      	end
      end

2. In the FortiProxy CLI, enable inline inspection:

   config system fortindr
       set status enable
   end

3. Configure an AV profile in FortiProxy to use inline inspection and block detected infections (see also Create or edit an antivirus profile):

   config antivirus profile
       edit "av"
           set feature-set proxy
           config http
               set fortindr block
           end
           config ftp
               set fortindr block
           end
           config imap
               set fortindr block
           end
           config pop3
               set fortindr block
           end
           config smtp
               set fortindr block
           end
           config mapi
               set fortindr block
           end
           config nntp
               set fortindr block
           end
           config cifs
               set fortindr block
           end
           config ssh
               set fortindr block
           end
       next
   end

4. To configure the action to take when FortiNDR encounters an error, use the set fortindr-error-action {log-only | block | ignore} option of the config antivirus profile command. The default is log-only.

5. Add the AV profile to a policy. See Create or edit a policy.

   When potential infections are blocked by FortiNDR inline inspection, a replacement message appears. See Replacement Messages for more information. An infection blocked over HTTP looks similar to the following:

   

   Sample log

   1: date=2024-03-11 time=18:59:46 eventtime=1710208786621085225 tz="-0700" logid="0209008220" type="utm" subtype="virus" eventtype="fortindr" level="warning" vd="root" policyid=2 poluuid="516c4d58-7d9d-51ee-d4f1-7addc4e7603d" policytype="policy" msg="Blocked by FortiNDR." action="blocked" service="HTTPS" sessionid=1923893410 srcip=10.40.1.44 dstip=172.18.20.226 srcport=57300 dstport=443 srccountry="Reserved" dstcountry="Reserved" srcintf="port1" srcintfrole="undefined" dstintf="port2" dstintfrole="undefined" proto=6 direction="incoming" filename="606C9848.zip" quarskip="File-was-not-quarantined" virus="W32/Industroyer.A!tr" viruscat="Industroyer" dtype="fortindr" ref=" http://www.fortinet.com/ve?vn=W32%2FIndustroyer.A%21tr" virusid=0 url=" https://172.18.20.226/files/606C9848.zip" profile="av" agent="curl/7.76.1" analyticssubmit="false" fndraction="deny" fndrseverity="critical" fndrconfidence="high" fndrfileid=466490 fndrfiletype="ZIP" crscore=50 craction=2 crlevel="critical"

FortiNDR inline inspection with other AV inspection methods

The following inspection logic applies when FortiNDR inline inspection is enabled simultaneously with other AV inspection methods. The AV engine inspection and its verdict always takes precedence because of performance. The actual behavior depends on which inspected protocol is used.

HTTP, FTP, SSH, and CIFS protocols:

1. AV engine scan; AV database and FortiSandbox database (if applicable).
   1. FortiNDR inline inspection occurs simultaneously.
2. AV engine machine learning detection for WinPE PUPs (potentially unwanted programs).
   1. FortiNDR inline inspection occurs simultaneously.
3. Outbreak prevention and external hash list resources.
   1. FortiNDR inline inspection occurs simultaneously.

If any AV inspection method returns an infected verdict, the FortiNDR inspection is aborted.

POP3, IMAP, SMTP, NNTP, and MAPI protocols:

1. AV engine scan; AV database and FortiSandbox database (if applicable).
2. AV engine machine learning detection for WinPE PUPs (potentially unwanted programs).
   1. FortiNDR inline inspection occurs simultaneously.
3. Outbreak prevention and external hash list resources.
   1. FortiNDR inline inspection occurs simultaneously.

In an AV profile, use set fortindr-error-action {log-only | block | ignore} to configure the action to take if FortiNDR encounters an error.

Accepted file types

The following file types are sent to FortiNDR for inline inspection:

7Z ARJ BZIP BZIP2 CAB ELF GZIP

HTML JS LZH LZW MS Office documents (XML and non-XML) PDF RAR

RTF TAR VBA VBS WinPE (EXE) XZ ZIP