Scan Profile Job Queue Tab
Use the Job Queue to define file types and URLs that are allowed to enter the job queue if they are from a sniffer, adapter, or device other than FortiMail.
Files or URLs submitted through On-Demand, RPC JSON API, network share, or FortiMail are always put into the job queue even if their file types are not set to enter the job queue.
To allow a file type to enter the job queue:
Click its toggle button on the right side to enable it. If the button is greyed out, files of that type will be dropped.
FortiSandbox supports a customized timeout value to control the tracer running time in VM.
To configure File Detection:
- Select Scan Policy > Scan Profile
- In the File detection window, enter a Default Timeout value between 60 and 180 seconds.
A shorter Default Timeout value gives better performance and faster scan speed, but lower accuracy. For a balance of speed and accuracy, use a value that falls in the middle of the 60-180 second range.
- Click Apply to save.
The Scan results shows the VM Scan time.
When URL detection is enabled, FortiSandbox scans URLs (WEBLinks). You can also define the Default Depth setting (from 0 to 5) of the URL and the Default Timeout.
If a file type is turned off, files of that type already in the job queue will still be processed. You can use the