Viewing configuration status
On the Device Manager pane, you can view the configuration status for managed devices.
For a description of other columns on the Device Manager pane, see Viewing managed devices.
To view configuration status:
- Go to Device Manager > Device & Groups.
- In the toolbar, select Table View from the dropdown menu.
- In the tree menu, click the device group name, for example, Managed Devices. The devices in the group are displayed in the content pane.
The following table identifies the different config statuses.
Config Status
Icon
Description
Synchronized
Green check
Configurations are synchronized between FortiManager and the managed device.
Modified
Yellow triangle
Configurations are modified on FortiManager and not synchronized between FortiManager and the managed device.
Auto-update
Green check
Configurations modified on the managed device are auto synced to FortiManager.
Modified (recent auto-updated)
Yellow triangle
Configurations are modified on FortiManager and configurations modified on the managed device are auto synced to FortiManager.
Out of Sync
Red X
Configurations are modified on the managed device and not synced to FortiManager.
Conflict
Red X
When one of the following happens:
- Install failed
- Configurations are modified on both FortiManager and the managed device, and not auto synced to FortiManager.
Unknown
Gray question mark
When one of the following happens:
- Connection goes down
- No revision is generated, like added model device