Fortinet black logo

Administration Guide

Home FortiPAM 1.0.0 Administration Guide
1.0.0
1.3.0
1.2.0
1.1.2
1.1.1
1.1.0
1.0.3
1.0.2
1.0.1
1.0.0

CLI commands

CLI commands

FortiPAM has CLI commands that are accessed using SSH or Telnet, or through the CLI console if a FortiPAM is installed on a FortiHypervisor.

To open a CLI console, click the >_ icon in the top right corner of the GUI. The console opens on top of the GUI. It can be minimized and multiple consoles can be opened.

CLI commands can be used to initially configure the unit, perform a factory reset, or reset the values if the GUI is not accessible.

The FortiPAM-VM's console allows scrolling up and down through the CLI output by using Shift+PageUp and Shift+PageDown.

Like FortiOS, the ? key can be used to display all possible options available to you, depending upon where you are hierarchically-situated.
Previous
Next

CLI commands

FortiPAM has CLI commands that are accessed using SSH or Telnet, or through the CLI console if a FortiPAM is installed on a FortiHypervisor.

To open a CLI console, click the >_ icon in the top right corner of the GUI. The console opens on top of the GUI. It can be minimized and multiple consoles can be opened.

CLI commands can be used to initially configure the unit, perform a factory reset, or reset the values if the GUI is not accessible.

The FortiPAM-VM's console allows scrolling up and down through the CLI output by using Shift+PageUp and Shift+PageDown.

Like FortiOS, the ? key can be used to display all possible options available to you, depending upon where you are hierarchically-situated.
Previous
Next