Static routes
Go to Network > Static Routing to see a list of static routes that control the flow of traffic through the FortiPAM device.
For each static route; destination, gateway IP address, interface, status, and comments are displayed.
|
Hover over the leftmost edge of the column heading to display the Configure Table icon, which you can use to select the columns to display or to reset all the columns to their default settings. You can also drag column headings to change their order. |
The following options are available in the Static Routes tab:
|
+Create New |
From the dropdown, select to create an IPv4 static route. See Creating an IPv4 static route. |
|
Edit |
Select to edit the selected static route. |
|
Clone |
Select to clone the selected static route. |
|
Delete |
Select to delete the selected static route. |
|
Search |
Use the search bar to look for a static route. |