Addresses
The Addresses tab in Authentication displays a list of configured addresses.
An address is a set of one or more IP addresses, represented as a domain name, an IP address and a subnet mask, or an IP address range. You can also specify an address as a country. The address can apply to all interfaces, or you can configure a specific interface.
You can create an address groups, which defines a group of related addresses.
For an address; name, details, interface, type, and references are shown.
The Addresses tab contains the following options:
+Create New |
From the dropdown, select Address or Address Group to create an address or an address group. |
Edit |
Select to edit the selected address or address group. |
Clone |
Select to clone the selected address or address group. |
Delete |
Select to delete the selected addresses or address groups. |
Search |
Enter a search term in the search field, then hit |
Refresh |
To refresh the contents, click the refresh icon on the bottom-right. |